This is the latest recevied telemetry packets stored in our database for station/object SP6TK-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1748025414 | 368 Count | 304 Count | 134 Count | 0 VDC | 0 VDC |
| 1748024213 | 346 Count | 278 Count | 124 Count | 0 VDC | 0 VDC |
| 1748023013 | 319 Count | 252 Count | 114 Count | 0 VDC | 0 VDC |
| 1748021812 | 293 Count | 234 Count | 105 Count | 0 VDC | 0 VDC |
| 1748020611 | 264 Count | 205 Count | 94 Count | 0 VDC | 0 VDC |
| 1748019410 | 230 Count | 180 Count | 85 Count | 0 VDC | 0 VDC |
| 1748018210 | 203 Count | 156 Count | 78 Count | 0 VDC | 0 VDC |
| 1748017009 | 177 Count | 134 Count | 68 Count | 0 VDC | 0 VDC |
| 1748015808 | 146 Count | 115 Count | 58 Count | 0 VDC | 0 VDC |
| 1748014618 | 119 Count | 95 Count | 50 Count | 0 VDC | 0 VDC |
| 1748013417 | 102 Count | 75 Count | 39 Count | 0 VDC | 0 VDC |
| 1748012216 | 73 Count | 57 Count | 30 Count | 0 VDC | 0 VDC |
| 1748011016 | 46 Count | 37 Count | 21 Count | 0 VDC | 0 VDC |
| 1748009815 | 25 Count | 19 Count | 10 Count | 0 VDC | 0 VDC |
| 1748008614 | 1022 Count | 597 Count | 342 Count | 0 VDC | 0 VDC |
| 1748007414 | 989 Count | 578 Count | 333 Count | 0 VDC | 0 VDC |
| 1748006213 | 941 Count | 528 Count | 322 Count | 0 VDC | 0 VDC |
| 1748005012 | 892 Count | 496 Count | 301 Count | 0 VDC | 0 VDC |
| 1748003812 | 860 Count | 477 Count | 291 Count | 0 VDC | 0 VDC |
| 1748002611 | 831 Count | 457 Count | 282 Count | 0 VDC | 0 VDC |
| 1748001410 | 794 Count | 440 Count | 273 Count | 0 VDC | 0 VDC |
| 1748000210 | 761 Count | 419 Count | 263 Count | 0 VDC | 0 VDC |
| 1747999009 | 721 Count | 397 Count | 253 Count | 0 VDC | 0 VDC |
| 1747996607 | 616 Count | 338 Count | 212 Count | 0 VDC | 0 VDC |
| 1747995407 | 562 Count | 308 Count | 190 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)