This is the latest recevied telemetry packets stored in our database for station/object SP5JWP-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1744675942 | 56 Count | 157 Count | 32 Count | 0 VDC | 0 VDC |
| 1744674141 | 51 Count | 137 Count | 28 Count | 0 VDC | 0 VDC |
| 1744672341 | 45 Count | 121 Count | 24 Count | 0 VDC | 0 VDC |
| 1744670540 | 40 Count | 105 Count | 20 Count | 0 VDC | 0 VDC |
| 1744668753 | 34 Count | 85 Count | 16 Count | 0 VDC | 0 VDC |
| 1744666952 | 29 Count | 64 Count | 12 Count | 0 VDC | 0 VDC |
| 1744665151 | 25 Count | 48 Count | 9 Count | 0 VDC | 0 VDC |
| 1744663350 | 20 Count | 32 Count | 6 Count | 0 VDC | 0 VDC |
| 1744661549 | 16 Count | 16 Count | 3 Count | 0 VDC | 0 VDC |
| 1744659748 | 256 Count | 1003 Count | 202 Count | 0 VDC | 0 VDC |
| 1744657947 | 253 Count | 980 Count | 200 Count | 0 VDC | 0 VDC |
| 1744656147 | 248 Count | 945 Count | 197 Count | 0 VDC | 0 VDC |
| 1744654346 | 244 Count | 922 Count | 194 Count | 0 VDC | 0 VDC |
| 1744652541 | 238 Count | 876 Count | 189 Count | 0 VDC | 0 VDC |
| 1744650740 | 227 Count | 850 Count | 180 Count | 0 VDC | 0 VDC |
| 1744648940 | 214 Count | 816 Count | 168 Count | 0 VDC | 0 VDC |
| 1744647149 | 205 Count | 794 Count | 161 Count | 0 VDC | 0 VDC |
| 1744645348 | 196 Count | 762 Count | 153 Count | 0 VDC | 0 VDC |
| 1744643547 | 185 Count | 735 Count | 144 Count | 0 VDC | 0 VDC |
| 1744641746 | 177 Count | 711 Count | 137 Count | 0 VDC | 0 VDC |
| 1744638144 | 141 Count | 603 Count | 104 Count | 0 VDC | 0 VDC |
| 1744636342 | 135 Count | 577 Count | 100 Count | 0 VDC | 0 VDC |
| 1744634541 | 130 Count | 559 Count | 96 Count | 0 VDC | 0 VDC |
| 1744632740 | 125 Count | 539 Count | 92 Count | 0 VDC | 0 VDC |
| 1744630940 | 119 Count | 512 Count | 88 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)