This is the latest recevied telemetry packets stored in our database for station/object SP9DAT-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1745055145 | 326 Count | 539 Count | 237 Count | 0 VDC | 0 VDC |
| 1745054245 | 322 Count | 531 Count | 234 Count | 0 VDC | 0 VDC |
| 1745053344 | 319 Count | 526 Count | 232 Count | 0 VDC | 0 VDC |
| 1745052443 | 315 Count | 518 Count | 229 Count | 0 VDC | 0 VDC |
| 1745051542 | 312 Count | 513 Count | 227 Count | 0 VDC | 0 VDC |
| 1745050641 | 307 Count | 504 Count | 223 Count | 0 VDC | 0 VDC |
| 1745049740 | 304 Count | 499 Count | 221 Count | 0 VDC | 0 VDC |
| 1745048840 | 299 Count | 490 Count | 217 Count | 0 VDC | 0 VDC |
| 1745047939 | 296 Count | 485 Count | 215 Count | 0 VDC | 0 VDC |
| 1745047037 | 291 Count | 475 Count | 211 Count | 0 VDC | 0 VDC |
| 1745046136 | 288 Count | 470 Count | 209 Count | 0 VDC | 0 VDC |
| 1745045236 | 283 Count | 461 Count | 205 Count | 0 VDC | 0 VDC |
| 1745044334 | 280 Count | 455 Count | 203 Count | 0 VDC | 0 VDC |
| 1745043434 | 276 Count | 447 Count | 200 Count | 0 VDC | 0 VDC |
| 1745042533 | 273 Count | 442 Count | 198 Count | 0 VDC | 0 VDC |
| 1745041632 | 267 Count | 433 Count | 193 Count | 0 VDC | 0 VDC |
| 1745040731 | 262 Count | 426 Count | 189 Count | 0 VDC | 0 VDC |
| 1745039830 | 257 Count | 417 Count | 185 Count | 0 VDC | 0 VDC |
| 1745038929 | 253 Count | 412 Count | 182 Count | 0 VDC | 0 VDC |
| 1745038029 | 248 Count | 403 Count | 178 Count | 0 VDC | 0 VDC |
| 1745037128 | 245 Count | 397 Count | 176 Count | 0 VDC | 0 VDC |
| 1745036227 | 240 Count | 388 Count | 172 Count | 0 VDC | 0 VDC |
| 1745035326 | 236 Count | 383 Count | 169 Count | 0 VDC | 0 VDC |
| 1745034425 | 231 Count | 370 Count | 165 Count | 0 VDC | 0 VDC |
| 1745033524 | 228 Count | 364 Count | 163 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)