This is the latest recevied telemetry packets stored in our database for station/object SQ3OPF-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1744260686 | 278 Count | 652 Count | 198 Count | 0 VDC | 0 VDC |
| 1744258885 | 272 Count | 640 Count | 194 Count | 0 VDC | 0 VDC |
| 1744256183 | 259 Count | 621 Count | 184 Count | 0 VDC | 0 VDC |
| 1744254382 | 253 Count | 607 Count | 180 Count | 0 VDC | 0 VDC |
| 1744253481 | 249 Count | 600 Count | 177 Count | 0 VDC | 0 VDC |
| 1744251680 | 241 Count | 589 Count | 171 Count | 0 VDC | 0 VDC |
| 1744250779 | 237 Count | 580 Count | 168 Count | 0 VDC | 0 VDC |
| 1744249879 | 229 Count | 561 Count | 161 Count | 0 VDC | 0 VDC |
| 1744248978 | 225 Count | 554 Count | 158 Count | 0 VDC | 0 VDC |
| 1744239085 | 164 Count | 414 Count | 112 Count | 0 VDC | 0 VDC |
| 1744236383 | 152 Count | 391 Count | 103 Count | 0 VDC | 0 VDC |
| 1744232781 | 138 Count | 358 Count | 93 Count | 0 VDC | 0 VDC |
| 1744231880 | 132 Count | 345 Count | 88 Count | 0 VDC | 0 VDC |
| 1744230979 | 131 Count | 340 Count | 88 Count | 0 VDC | 0 VDC |
| 1744229178 | 124 Count | 318 Count | 83 Count | 0 VDC | 0 VDC |
| 1744228277 | 121 Count | 308 Count | 81 Count | 0 VDC | 0 VDC |
| 1744227377 | 117 Count | 297 Count | 78 Count | 0 VDC | 0 VDC |
| 1744226476 | 114 Count | 286 Count | 76 Count | 0 VDC | 0 VDC |
| 1744225592 | 105 Count | 274 Count | 72 Count | 0 VDC | 0 VDC |
| 1744224691 | 99 Count | 265 Count | 67 Count | 0 VDC | 0 VDC |
| 1744223790 | 97 Count | 257 Count | 66 Count | 0 VDC | 0 VDC |
| 1744222890 | 95 Count | 248 Count | 65 Count | 0 VDC | 0 VDC |
| 1744221989 | 90 Count | 236 Count | 61 Count | 0 VDC | 0 VDC |
| 1744221088 | 86 Count | 227 Count | 58 Count | 0 VDC | 0 VDC |
| 1744220188 | 84 Count | 220 Count | 57 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)