This is the latest recevied telemetry packets stored in our database for station/object SP2WH-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1748084409 | 381 Count | 729 Count | 375 Count | 0 VDC | 0 VDC |
| 1748082608 | 353 Count | 677 Count | 348 Count | 0 VDC | 0 VDC |
| 1748080808 | 321 Count | 615 Count | 317 Count | 0 VDC | 0 VDC |
| 1748079007 | 274 Count | 514 Count | 271 Count | 0 VDC | 0 VDC |
| 1748077206 | 211 Count | 387 Count | 209 Count | 0 VDC | 0 VDC |
| 1748075406 | 155 Count | 275 Count | 154 Count | 0 VDC | 0 VDC |
| 1748073605 | 45 Count | 90 Count | 45 Count | 0 VDC | 0 VDC |
| 1748071805 | 385 Count | 1028 Count | 374 Count | 0 VDC | 0 VDC |
| 1748070004 | 344 Count | 957 Count | 334 Count | 0 VDC | 0 VDC |
| 1748068203 | 319 Count | 903 Count | 310 Count | 0 VDC | 0 VDC |
| 1748066403 | 287 Count | 830 Count | 279 Count | 0 VDC | 0 VDC |
| 1748064602 | 262 Count | 774 Count | 255 Count | 0 VDC | 0 VDC |
| 1748062802 | 231 Count | 702 Count | 225 Count | 0 VDC | 0 VDC |
| 1748061001 | 202 Count | 619 Count | 197 Count | 0 VDC | 0 VDC |
| 1748059200 | 167 Count | 531 Count | 163 Count | 0 VDC | 0 VDC |
| 1748057400 | 136 Count | 424 Count | 133 Count | 0 VDC | 0 VDC |
| 1748055599 | 99 Count | 318 Count | 97 Count | 0 VDC | 0 VDC |
| 1748053798 | 69 Count | 222 Count | 68 Count | 0 VDC | 0 VDC |
| 1748051998 | 33 Count | 106 Count | 33 Count | 0 VDC | 0 VDC |
| 1748050197 | 415 Count | 1090 Count | 403 Count | 0 VDC | 0 VDC |
| 1748048397 | 378 Count | 980 Count | 367 Count | 0 VDC | 0 VDC |
| 1748046596 | 340 Count | 858 Count | 330 Count | 0 VDC | 0 VDC |
| 1748044795 | 309 Count | 770 Count | 300 Count | 0 VDC | 0 VDC |
| 1748042995 | 280 Count | 683 Count | 272 Count | 0 VDC | 0 VDC |
| 1748041194 | 246 Count | 585 Count | 239 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)