This is the latest recevied telemetry packets stored in our database for station/object SR8KP-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1752400598 | 311 Count | 894 Count | 163 Count | 2.58 VDC | 0 VDC |
| 1752399698 | 308 Count | 878 Count | 161 Count | 2.4 VDC | 0 VDC |
| 1752398797 | 305 Count | 860 Count | 159 Count | 2.43 VDC | 0 VDC |
| 1752397896 | 302 Count | 851 Count | 157 Count | 2.67 VDC | 0 VDC |
| 1752396996 | 300 Count | 845 Count | 156 Count | 2.45 VDC | 0 VDC |
| 1752396095 | 298 Count | 838 Count | 155 Count | 2.2 VDC | 0 VDC |
| 1752395195 | 296 Count | 832 Count | 154 Count | 2.61 VDC | 0 VDC |
| 1752394294 | 294 Count | 826 Count | 153 Count | 2.33 VDC | 0 VDC |
| 1752393393 | 292 Count | 819 Count | 152 Count | 2.46 VDC | 0 VDC |
| 1752392493 | 290 Count | 809 Count | 151 Count | 2.08 VDC | 0 VDC |
| 1752391592 | 288 Count | 803 Count | 150 Count | 2.28 VDC | 0 VDC |
| 1752390691 | 285 Count | 793 Count | 148 Count | 2.25 VDC | 0 VDC |
| 1752389791 | 283 Count | 790 Count | 147 Count | 2.06 VDC | 0 VDC |
| 1752388890 | 281 Count | 782 Count | 146 Count | 2.09 VDC | 0 VDC |
| 1752387989 | 279 Count | 777 Count | 145 Count | 2.17 VDC | 0 VDC |
| 1752387089 | 277 Count | 770 Count | 144 Count | 2.04 VDC | 0 VDC |
| 1752386188 | 275 Count | 765 Count | 143 Count | 2.53 VDC | 0 VDC |
| 1752385288 | 273 Count | 760 Count | 142 Count | 2.3 VDC | 0 VDC |
| 1752384387 | 271 Count | 753 Count | 141 Count | 2.16 VDC | 0 VDC |
| 1752383486 | 269 Count | 747 Count | 140 Count | 2.17 VDC | 0 VDC |
| 1752382585 | 266 Count | 739 Count | 139 Count | 2.24 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)