This is the latest recevied telemetry packets stored in our database for station/object SP9RUT-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1754233628 | 585 Count | 160 Count | 0 Count | 0 VDC | 0 VDC |
| 1754230026 | 517 Count | 139 Count | 0 Count | 0 VDC | 0 VDC |
| 1754222821 | 378 Count | 103 Count | 0 Count | 0 VDC | 0 VDC |
| 1754183218 | 637 Count | 186 Count | 0 Count | 0 VDC | 0 VDC |
| 1754179616 | 589 Count | 162 Count | 0 Count | 0 VDC | 0 VDC |
| 1754154432 | 101 Count | 31 Count | 0 Count | 0 VDC | 0 VDC |
| 1754150832 | 33 Count | 9 Count | 0 Count | 0 VDC | 0 VDC |
| 1754147227 | 968 Count | 288 Count | 0 Count | 0 VDC | 0 VDC |
| 1754143626 | 901 Count | 270 Count | 0 Count | 0 VDC | 0 VDC |
| 1754140024 | 831 Count | 252 Count | 0 Count | 0 VDC | 0 VDC |
| 1754136422 | 762 Count | 233 Count | 0 Count | 0 VDC | 0 VDC |
| 1754132832 | 690 Count | 218 Count | 0 Count | 0 VDC | 0 VDC |
| 1754129227 | 621 Count | 202 Count | 0 Count | 0 VDC | 0 VDC |
| 1754125626 | 553 Count | 186 Count | 0 Count | 0 VDC | 0 VDC |
| 1754122025 | 484 Count | 166 Count | 0 Count | 0 VDC | 0 VDC |
| 1754114822 | 347 Count | 125 Count | 0 Count | 0 VDC | 0 VDC |
| 1754089658 | 541 Count | 950 Count | 0 Count | 0 VDC | 0 VDC |
| 1754078838 | 334 Count | 894 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)