LoRa APRS Track Direct

☰

reset

SR9EMP-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR9EMP-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	TX*	RX*	Digi*
1752376228	63 Count	471 Count	58 Count
1752375704	115 Count	938 Count	105 Count
1752375269	41 Count	309 Count	38 Count
1752374810	31 Count	245 Count	29 Count
1752374803	104 Count	845 Count	95 Count
1752374026	21 Count	174 Count	20 Count
1752373903	93 Count	758 Count	85 Count
1752373002	82 Count	655 Count	75 Count
1752372862	132 Count	1050 Count	119 Count
1752372402	124 Count	978 Count	112 Count
1752372101	72 Count	569 Count	66 Count
1752371762	117 Count	916 Count	106 Count
1752371200	63 Count	471 Count	58 Count
1752370299	52 Count	397 Count	48 Count
1752369399	41 Count	309 Count	38 Count
1752368498	31 Count	245 Count	29 Count
1752367597	21 Count	174 Count	20 Count
1752366697	10 Count	93 Count	10 Count
1752365796	132 Count	1050 Count	119 Count
1752364895	124 Count	978 Count	112 Count
1752363994	117 Count	916 Count	106 Count
1752363093	104 Count	805 Count	94 Count
1752362192	94 Count	723 Count	85 Count
1752361292	84 Count	647 Count	76 Count
1752360391	74 Count	566 Count	67 Count

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time:

Maintained by I8FUC, based on APRS Track Direct