This is the latest recevied telemetry packets stored in our database for station/object SQ2CPA-14. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1743930631 | 48 Count | 676 Count | 0 Count | 3.98 VDC | 0.78 VDC |
| 1743928832 | 47 Count | 660 Count | 0 Count | 3.98 VDC | 3.7 VDC |
| 1743928822 | 42 Count | 660 Count | 0 Count | 3.98 VDC | 2.8 VDC |
| 1743927023 | 41 Count | 644 Count | 0 Count | 3.98 VDC | 1.7 VDC |
| 1743925223 | 40 Count | 628 Count | 0 Count | 3.98 VDC | 3.84 VDC |
| 1743923425 | 39 Count | 612 Count | 0 Count | 3.98 VDC | 3.36 VDC |
| 1743921625 | 38 Count | 594 Count | 0 Count | 3.98 VDC | 1.98 VDC |
| 1743919826 | 37 Count | 578 Count | 0 Count | 3.98 VDC | 4.1 VDC |
| 1743918025 | 36 Count | 561 Count | 0 Count | 3.98 VDC | 4.14 VDC |
| 1743916226 | 35 Count | 545 Count | 0 Count | 3.98 VDC | 4.14 VDC |
| 1743914427 | 34 Count | 532 Count | 0 Count | 3.98 VDC | 0.12 VDC |
| 1743912628 | 33 Count | 516 Count | 0 Count | 3.98 VDC | 0.12 VDC |
| 1743910829 | 32 Count | 500 Count | 0 Count | 3.98 VDC | 0.12 VDC |
| 1743909030 | 31 Count | 485 Count | 0 Count | 3.98 VDC | 0.12 VDC |
| 1743907230 | 30 Count | 471 Count | 0 Count | 3.98 VDC | 0.12 VDC |
| 1743901832 | 27 Count | 427 Count | 0 Count | 3.98 VDC | 0.12 VDC |
| 1743900033 | 26 Count | 413 Count | 0 Count | 3.98 VDC | 0.12 VDC |
| 1743898234 | 25 Count | 403 Count | 0 Count | 3.98 VDC | 0.12 VDC |
| 1743896435 | 24 Count | 388 Count | 0 Count | 3.98 VDC | 0.12 VDC |
| 1743894636 | 23 Count | 372 Count | 0 Count | 3.98 VDC | 0.12 VDC |
| 1743892836 | 22 Count | 355 Count | 0 Count | 3.98 VDC | 0.12 VDC |
| 1743891037 | 21 Count | 339 Count | 0 Count | 3.98 VDC | 0.12 VDC |
| 1743889238 | 20 Count | 324 Count | 0 Count | 3.98 VDC | 0.12 VDC |
| 1743887438 | 19 Count | 308 Count | 0 Count | 3.99 VDC | 0.12 VDC |
| 1743885638 | 18 Count | 292 Count | 0 Count | 3.99 VDC | 0.12 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)