This is the latest recevied telemetry packets stored in our database for station/object SR2ZXT-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1748093087 | 139 Count | 635 Count | 121 Count | 0 VDC | 0 VDC |
| 1748091287 | 135 Count | 591 Count | 118 Count | 0 VDC | 0 VDC |
| 1748089486 | 130 Count | 551 Count | 114 Count | 0 VDC | 0 VDC |
| 1748087686 | 126 Count | 509 Count | 111 Count | 0 VDC | 0 VDC |
| 1748085885 | 121 Count | 471 Count | 107 Count | 0 VDC | 0 VDC |
| 1748084084 | 117 Count | 450 Count | 104 Count | 0 VDC | 0 VDC |
| 1748082284 | 110 Count | 419 Count | 98 Count | 0 VDC | 0 VDC |
| 1748080489 | 106 Count | 395 Count | 95 Count | 0 VDC | 0 VDC |
| 1748078689 | 99 Count | 368 Count | 89 Count | 0 VDC | 0 VDC |
| 1748076888 | 94 Count | 339 Count | 85 Count | 0 VDC | 0 VDC |
| 1748075087 | 87 Count | 310 Count | 79 Count | 0 VDC | 0 VDC |
| 1748073287 | 67 Count | 227 Count | 60 Count | 0 VDC | 0 VDC |
| 1748071486 | 39 Count | 166 Count | 33 Count | 0 VDC | 0 VDC |
| 1748069685 | 34 Count | 131 Count | 29 Count | 0 VDC | 0 VDC |
| 1748067884 | 29 Count | 103 Count | 25 Count | 0 VDC | 0 VDC |
| 1748066084 | 22 Count | 86 Count | 19 Count | 0 VDC | 0 VDC |
| 1748064283 | 18 Count | 65 Count | 16 Count | 0 VDC | 0 VDC |
| 1748062482 | 11 Count | 44 Count | 10 Count | 0 VDC | 0 VDC |
| 1748060682 | 5 Count | 21 Count | 5 Count | 0 VDC | 0 VDC |
| 1748058887 | 335 Count | 1014 Count | 307 Count | 0 VDC | 0 VDC |
| 1748057087 | 331 Count | 988 Count | 304 Count | 0 VDC | 0 VDC |
| 1748055286 | 325 Count | 955 Count | 299 Count | 0 VDC | 0 VDC |
| 1748053485 | 320 Count | 934 Count | 295 Count | 0 VDC | 0 VDC |
| 1748051685 | 314 Count | 906 Count | 290 Count | 0 VDC | 0 VDC |
| 1748049884 | 308 Count | 884 Count | 285 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)