LoRa APRS Track Direct

☰

reset

SP9KKK-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP9KKK-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	TX*	RX*	Digi*
1761605563	147 Count	1047 Count	128 Count
1761604662	139 Count	986 Count	121 Count
1761603760	125 Count	886 Count	109 Count
1761602859	118 Count	816 Count	103 Count
1761601959	108 Count	720 Count	94 Count
1761601058	99 Count	651 Count	86 Count
1761600157	86 Count	576 Count	74 Count
1761599256	83 Count	540 Count	73 Count
1761598355	73 Count	469 Count	64 Count
1761597454	68 Count	434 Count	60 Count
1761596553	64 Count	383 Count	57 Count
1761595652	45 Count	276 Count	40 Count
1761594751	39 Count	233 Count	35 Count
1761593850	28 Count	169 Count	25 Count
1761592949	19 Count	109 Count	17 Count
1761592049	14 Count	82 Count	14 Count
1761591148	181 Count	1071 Count	167 Count
1761590247	159 Count	978 Count	146 Count
1761589346	142 Count	891 Count	130 Count
1761588445	124 Count	766 Count	114 Count
1761587544	102 Count	640 Count	94 Count
1761586643	88 Count	550 Count	81 Count
1761585742	82 Count	504 Count	76 Count
1761584841	81 Count	478 Count	76 Count
1761583940	59 Count	371 Count	56 Count

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time:

Maintained by I8FUC, based on APRS Track Direct