This is the latest recevied telemetry packets stored in our database for station/object SR2ATJ-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1750481161 | 79 Count | 1011 Count | 19 Count | 4.01 VDC | 0 VDC |
| 1750479360 | 73 Count | 928 Count | 17 Count | 4 VDC | 0 VDC |
| 1750477559 | 66 Count | 849 Count | 15 Count | 4.01 VDC | 0 VDC |
| 1750475759 | 60 Count | 784 Count | 13 Count | 4 VDC | 0 VDC |
| 1750473958 | 55 Count | 721 Count | 12 Count | 3.99 VDC | 0 VDC |
| 1750472157 | 49 Count | 640 Count | 10 Count | 3.99 VDC | 0 VDC |
| 1750470357 | 44 Count | 572 Count | 9 Count | 3.99 VDC | 0 VDC |
| 1750468556 | 39 Count | 503 Count | 8 Count | 3.99 VDC | 0 VDC |
| 1750466755 | 34 Count | 426 Count | 7 Count | 3.99 VDC | 0 VDC |
| 1750464954 | 29 Count | 359 Count | 6 Count | 4 VDC | 0 VDC |
| 1750463154 | 24 Count | 292 Count | 5 Count | 4 VDC | 0 VDC |
| 1750461353 | 19 Count | 230 Count | 4 Count | 4 VDC | 0 VDC |
| 1750459553 | 14 Count | 169 Count | 3 Count | 4 VDC | 0 VDC |
| 1750457752 | 9 Count | 111 Count | 2 Count | 4 VDC | 0 VDC |
| 1750455951 | 4 Count | 56 Count | 1 Count | 4 VDC | 0 VDC |
| 1750454151 | 128 Count | 1016 Count | 59 Count | 4 VDC | 0 VDC |
| 1750452350 | 123 Count | 945 Count | 58 Count | 4 VDC | 0 VDC |
| 1750450549 | 119 Count | 867 Count | 57 Count | 4 VDC | 0 VDC |
| 1750448749 | 114 Count | 818 Count | 56 Count | 4 VDC | 0 VDC |
| 1750446951 | 109 Count | 768 Count | 55 Count | 4.01 VDC | 0 VDC |
| 1750445148 | 92 Count | 678 Count | 42 Count | 4 VDC | 0 VDC |
| 1750443348 | 87 Count | 620 Count | 41 Count | 4.01 VDC | 0 VDC |
| 1750441547 | 81 Count | 553 Count | 40 Count | 4.02 VDC | 0 VDC |
| 1750439753 | 76 Count | 500 Count | 39 Count | 4.02 VDC | 0 VDC |
| 1750437946 | 70 Count | 445 Count | 38 Count | 4.02 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)