This is the latest recevied telemetry packets stored in our database for station/object SP2WH-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1760383190 | 392 Count | 1057 Count | 383 Count | 0 VDC | 0 VDC |
| 1760381389 | 359 Count | 980 Count | 351 Count | 0 VDC | 0 VDC |
| 1760379588 | 321 Count | 879 Count | 314 Count | 0 VDC | 0 VDC |
| 1760377788 | 294 Count | 787 Count | 288 Count | 0 VDC | 0 VDC |
| 1760375987 | 269 Count | 709 Count | 264 Count | 0 VDC | 0 VDC |
| 1760374186 | 228 Count | 591 Count | 224 Count | 0 VDC | 0 VDC |
| 1760372386 | 191 Count | 488 Count | 188 Count | 0 VDC | 0 VDC |
| 1760370585 | 153 Count | 380 Count | 151 Count | 0 VDC | 0 VDC |
| 1760368785 | 115 Count | 266 Count | 114 Count | 0 VDC | 0 VDC |
| 1760366984 | 68 Count | 148 Count | 68 Count | 0 VDC | 0 VDC |
| 1760365183 | 400 Count | 1004 Count | 391 Count | 0 VDC | 0 VDC |
| 1760363383 | 344 Count | 875 Count | 336 Count | 0 VDC | 0 VDC |
| 1760361582 | 313 Count | 788 Count | 306 Count | 0 VDC | 0 VDC |
| 1760359782 | 266 Count | 679 Count | 260 Count | 0 VDC | 0 VDC |
| 1760357981 | 234 Count | 588 Count | 229 Count | 0 VDC | 0 VDC |
| 1760356181 | 197 Count | 491 Count | 193 Count | 0 VDC | 0 VDC |
| 1760354380 | 156 Count | 401 Count | 153 Count | 0 VDC | 0 VDC |
| 1760352579 | 116 Count | 308 Count | 114 Count | 0 VDC | 0 VDC |
| 1760350778 | 78 Count | 213 Count | 77 Count | 0 VDC | 0 VDC |
| 1760348978 | 40 Count | 113 Count | 40 Count | 0 VDC | 0 VDC |
| 1760347177 | 464 Count | 1125 Count | 455 Count | 0 VDC | 0 VDC |
| 1760345377 | 406 Count | 995 Count | 398 Count | 0 VDC | 0 VDC |
| 1760343576 | 365 Count | 905 Count | 358 Count | 0 VDC | 0 VDC |
| 1760341776 | 332 Count | 823 Count | 326 Count | 0 VDC | 0 VDC |
| 1760339975 | 298 Count | 732 Count | 293 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)