This is the latest recevied telemetry packets stored in our database for station/object OK1FWG-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1756608026 | 609 Count | 284 Count | 258 Count | 0 VDC | 0 VDC |
| 1756606223 | 608 Count | 281 Count | 258 Count | 0 VDC | 0 VDC |
| 1756604420 | 605 Count | 281 Count | 258 Count | 0 VDC | 0 VDC |
| 1756602617 | 604 Count | 281 Count | 258 Count | 0 VDC | 0 VDC |
| 1756600814 | 603 Count | 281 Count | 258 Count | 0 VDC | 0 VDC |
| 1756599011 | 602 Count | 281 Count | 258 Count | 0 VDC | 0 VDC |
| 1756597208 | 599 Count | 281 Count | 258 Count | 0 VDC | 0 VDC |
| 1756595405 | 598 Count | 281 Count | 258 Count | 0 VDC | 0 VDC |
| 1756593601 | 597 Count | 281 Count | 258 Count | 0 VDC | 0 VDC |
| 1756591798 | 596 Count | 281 Count | 258 Count | 0 VDC | 0 VDC |
| 1756589995 | 593 Count | 281 Count | 258 Count | 0 VDC | 0 VDC |
| 1756588192 | 592 Count | 281 Count | 258 Count | 0 VDC | 0 VDC |
| 1756586389 | 591 Count | 281 Count | 258 Count | 0 VDC | 0 VDC |
| 1756584586 | 590 Count | 281 Count | 258 Count | 0 VDC | 0 VDC |
| 1756582783 | 587 Count | 281 Count | 258 Count | 0 VDC | 0 VDC |
| 1756580980 | 586 Count | 281 Count | 258 Count | 0 VDC | 0 VDC |
| 1756579177 | 585 Count | 281 Count | 258 Count | 0 VDC | 0 VDC |
| 1756577374 | 584 Count | 281 Count | 258 Count | 0 VDC | 0 VDC |
| 1756575571 | 580 Count | 280 Count | 257 Count | 0 VDC | 0 VDC |
| 1756573768 | 579 Count | 280 Count | 257 Count | 0 VDC | 0 VDC |
| 1756571965 | 578 Count | 280 Count | 257 Count | 0 VDC | 0 VDC |
| 1756570162 | 577 Count | 280 Count | 257 Count | 0 VDC | 0 VDC |
| 1756568359 | 574 Count | 280 Count | 257 Count | 0 VDC | 0 VDC |
| 1756566556 | 573 Count | 280 Count | 257 Count | 0 VDC | 0 VDC |
| 1756564753 | 572 Count | 280 Count | 257 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)