This is the latest recevied telemetry packets stored in our database for station/object SP2WIT-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1754317802 | 201 Count | 304 Count | 59 Count | 4.19 VDC | 5.8 VDC |
| 1754316003 | 200 Count | 300 Count | 59 Count | 4.19 VDC | 5.82 VDC |
| 1754314207 | 199 Count | 300 Count | 59 Count | 4.2 VDC | 5.82 VDC |
| 1754312410 | 198 Count | 298 Count | 59 Count | 4.2 VDC | 5.82 VDC |
| 1754310611 | 197 Count | 291 Count | 59 Count | 4.2 VDC | 5.8 VDC |
| 1754308810 | 196 Count | 289 Count | 59 Count | 4.2 VDC | 5.8 VDC |
| 1754307011 | 195 Count | 287 Count | 59 Count | 4.2 VDC | 5.8 VDC |
| 1754305212 | 194 Count | 287 Count | 59 Count | 4.21 VDC | 5.8 VDC |
| 1754303415 | 193 Count | 287 Count | 59 Count | 4.22 VDC | 4.84 VDC |
| 1754301620 | 187 Count | 282 Count | 54 Count | 4.19 VDC | 4.88 VDC |
| 1754298016 | 162 Count | 264 Count | 36 Count | 4.14 VDC | 5.82 VDC |
| 1754296215 | 155 Count | 258 Count | 30 Count | 4.14 VDC | 5.8 VDC |
| 1754294416 | 154 Count | 254 Count | 30 Count | 4.14 VDC | 5.82 VDC |
| 1754290814 | 152 Count | 254 Count | 30 Count | 4.15 VDC | 5.82 VDC |
| 1754289014 | 151 Count | 252 Count | 30 Count | 4.15 VDC | 5.8 VDC |
| 1754287212 | 150 Count | 251 Count | 30 Count | 4.15 VDC | 5.78 VDC |
| 1754285416 | 149 Count | 251 Count | 30 Count | 4.15 VDC | 5.78 VDC |
| 1754283616 | 143 Count | 246 Count | 25 Count | 4.13 VDC | 5.78 VDC |
| 1754281821 | 140 Count | 244 Count | 23 Count | 4.14 VDC | 4.64 VDC |
| 1754280025 | 139 Count | 244 Count | 23 Count | 4.13 VDC | 4.68 VDC |
| 1754278226 | 138 Count | 243 Count | 23 Count | 4.13 VDC | 0.8 VDC |
| 1754276429 | 137 Count | 243 Count | 23 Count | 4.13 VDC | 0 VDC |
| 1754274630 | 136 Count | 240 Count | 23 Count | 4.13 VDC | 0 VDC |
| 1754272831 | 135 Count | 240 Count | 23 Count | 4.13 VDC | 0 VDC |
| 1754271032 | 134 Count | 240 Count | 23 Count | 4.13 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)