LoRa APRS Track Direct

☰

reset

SQ2MO Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SQ2MO. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	TX*	RX*	Digi*
1762267230	331 Count	962 Count	42 Count
1762266629	329 Count	956 Count	42 Count
1762266028	327 Count	952 Count	42 Count
1762265427	325 Count	943 Count	42 Count
1762264827	323 Count	937 Count	42 Count
1762264226	321 Count	931 Count	42 Count
1762263625	319 Count	924 Count	42 Count
1762263025	317 Count	919 Count	42 Count
1762262424	315 Count	913 Count	42 Count
1762261823	313 Count	905 Count	42 Count
1762261222	311 Count	903 Count	42 Count
1762260621	309 Count	896 Count	42 Count
1762260025	306 Count	888 Count	42 Count
1762259420	304 Count	884 Count	42 Count
1762258819	302 Count	879 Count	42 Count
1762258218	300 Count	873 Count	42 Count
1762257617	298 Count	869 Count	42 Count
1762257017	286 Count	809 Count	32 Count
1762256415	284 Count	789 Count	32 Count
1762255814	282 Count	786 Count	32 Count
1762255213	280 Count	780 Count	32 Count
1762254613	278 Count	773 Count	32 Count
1762254012	276 Count	771 Count	32 Count
1762253411	274 Count	765 Count	32 Count
1762252810	271 Count	756 Count	32 Count

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time:

Maintained by I8FUC, based on APRS Track Direct