This is the latest recevied telemetry packets stored in our database for station/object SR7NSI-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
---|---|---|---|---|---|
1752237889 | 0 Count | 3 Count | 0 Count | 0 VDC | 0 VDC |
1752237288 | 1000 Count | 328 Count | 101 Count | 0 VDC | 0 VDC |
1752236687 | 999 Count | 323 Count | 101 Count | 0 VDC | 0 VDC |
1752236086 | 998 Count | 319 Count | 101 Count | 0 VDC | 0 VDC |
1752235485 | 997 Count | 319 Count | 101 Count | 0 VDC | 0 VDC |
1752234884 | 996 Count | 316 Count | 101 Count | 0 VDC | 0 VDC |
1752234284 | 995 Count | 314 Count | 101 Count | 0 VDC | 0 VDC |
1752233683 | 994 Count | 311 Count | 101 Count | 0 VDC | 0 VDC |
1752233082 | 993 Count | 308 Count | 101 Count | 0 VDC | 0 VDC |
1752232481 | 992 Count | 304 Count | 101 Count | 0 VDC | 0 VDC |
1752231880 | 991 Count | 298 Count | 101 Count | 0 VDC | 0 VDC |
1752231279 | 990 Count | 293 Count | 101 Count | 0 VDC | 0 VDC |
1752230678 | 989 Count | 287 Count | 101 Count | 0 VDC | 0 VDC |
1752230077 | 988 Count | 284 Count | 101 Count | 0 VDC | 0 VDC |
1752229477 | 987 Count | 282 Count | 101 Count | 0 VDC | 0 VDC |
1752228876 | 986 Count | 281 Count | 101 Count | 0 VDC | 0 VDC |
1752228275 | 985 Count | 278 Count | 101 Count | 0 VDC | 0 VDC |
1752227674 | 984 Count | 274 Count | 101 Count | 0 VDC | 0 VDC |
1752227073 | 983 Count | 269 Count | 101 Count | 0 VDC | 0 VDC |
1752226472 | 982 Count | 264 Count | 101 Count | 0 VDC | 0 VDC |
1752225871 | 981 Count | 262 Count | 101 Count | 0 VDC | 0 VDC |
1752225270 | 980 Count | 257 Count | 101 Count | 0 VDC | 0 VDC |
1752224670 | 979 Count | 253 Count | 101 Count | 0 VDC | 0 VDC |
1752224069 | 978 Count | 248 Count | 101 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)