This is the latest recevied telemetry packets stored in our database for station/object SQ2CPA-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1754381659 | 64 Count | 96 Count | 61 Count | 4.06 VDC | 5.54 VDC |
| 1754379862 | 30 Count | 55 Count | 28 Count | 4.06 VDC | 5.54 VDC |
| 1754378063 | 22 Count | 37 Count | 21 Count | 4.06 VDC | 5.54 VDC |
| 1754376264 | 14 Count | 22 Count | 14 Count | 4.08 VDC | 4.4 VDC |
| 1754374466 | 659 Count | 1007 Count | 553 Count | 4.08 VDC | 4.38 VDC |
| 1754372667 | 653 Count | 970 Count | 548 Count | 4.06 VDC | 4.4 VDC |
| 1754370868 | 647 Count | 936 Count | 543 Count | 4.06 VDC | 4.42 VDC |
| 1754369070 | 641 Count | 929 Count | 538 Count | 4.06 VDC | 4.42 VDC |
| 1754367273 | 635 Count | 923 Count | 533 Count | 4.06 VDC | 4.42 VDC |
| 1754365475 | 628 Count | 915 Count | 527 Count | 4.05 VDC | 4.42 VDC |
| 1754363677 | 621 Count | 902 Count | 521 Count | 4.05 VDC | 0.9 VDC |
| 1754361879 | 614 Count | 878 Count | 515 Count | 4.05 VDC | 0 VDC |
| 1754360080 | 607 Count | 864 Count | 509 Count | 4.05 VDC | 0 VDC |
| 1754358282 | 600 Count | 852 Count | 503 Count | 4.05 VDC | 0 VDC |
| 1754356483 | 592 Count | 836 Count | 496 Count | 4.05 VDC | 0 VDC |
| 1754354685 | 588 Count | 826 Count | 493 Count | 4.05 VDC | 0 VDC |
| 1754352885 | 585 Count | 815 Count | 491 Count | 4.05 VDC | 0 VDC |
| 1754351087 | 580 Count | 803 Count | 487 Count | 4.05 VDC | 0 VDC |
| 1754349289 | 573 Count | 790 Count | 481 Count | 4.05 VDC | 0 VDC |
| 1754347490 | 564 Count | 774 Count | 473 Count | 4.05 VDC | 0 VDC |
| 1754345691 | 557 Count | 761 Count | 467 Count | 4.05 VDC | 0 VDC |
| 1754343894 | 550 Count | 745 Count | 461 Count | 4.06 VDC | 0 VDC |
| 1754342096 | 543 Count | 732 Count | 455 Count | 4.06 VDC | 0 VDC |
| 1754340298 | 536 Count | 719 Count | 449 Count | 4.06 VDC | 0 VDC |
| 1754338500 | 528 Count | 704 Count | 442 Count | 4.06 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)