This is the latest recevied telemetry packets stored in our database for station/object UN1GWA-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1751551814 | 255 Count | 376 Count | 166 Count | 0 VDC | 0 VDC |
| 1751550908 | 252 Count | 371 Count | 164 Count | 0 VDC | 0 VDC |
| 1751550003 | 249 Count | 367 Count | 162 Count | 0 VDC | 0 VDC |
| 1751549097 | 247 Count | 366 Count | 161 Count | 0 VDC | 0 VDC |
| 1751548192 | 246 Count | 366 Count | 161 Count | 0 VDC | 0 VDC |
| 1751547286 | 245 Count | 366 Count | 161 Count | 0 VDC | 0 VDC |
| 1751546381 | 244 Count | 366 Count | 161 Count | 0 VDC | 0 VDC |
| 1751545474 | 243 Count | 366 Count | 161 Count | 0 VDC | 0 VDC |
| 1751544569 | 242 Count | 366 Count | 161 Count | 0 VDC | 0 VDC |
| 1751543664 | 241 Count | 366 Count | 161 Count | 0 VDC | 0 VDC |
| 1751542758 | 240 Count | 366 Count | 161 Count | 0 VDC | 0 VDC |
| 1751541986 | 239 Count | 366 Count | 161 Count | 0 VDC | 0 VDC |
| 1751541080 | 238 Count | 366 Count | 161 Count | 0 VDC | 0 VDC |
| 1751540175 | 237 Count | 366 Count | 161 Count | 0 VDC | 0 VDC |
| 1751539269 | 236 Count | 366 Count | 161 Count | 0 VDC | 0 VDC |
| 1751538363 | 235 Count | 366 Count | 161 Count | 0 VDC | 0 VDC |
| 1751537457 | 234 Count | 366 Count | 161 Count | 0 VDC | 0 VDC |
| 1751536552 | 233 Count | 366 Count | 161 Count | 0 VDC | 0 VDC |
| 1751535647 | 232 Count | 366 Count | 161 Count | 0 VDC | 0 VDC |
| 1751534740 | 231 Count | 366 Count | 161 Count | 0 VDC | 0 VDC |
| 1751533835 | 230 Count | 366 Count | 161 Count | 0 VDC | 0 VDC |
| 1751532929 | 227 Count | 359 Count | 159 Count | 0 VDC | 0 VDC |
| 1751532023 | 224 Count | 353 Count | 157 Count | 0 VDC | 0 VDC |
| 1751531117 | 221 Count | 346 Count | 155 Count | 0 VDC | 0 VDC |
| 1751530212 | 218 Count | 341 Count | 153 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)