LoRa APRS Track Direct

☰

reset

SQ9PQL-00 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SQ9PQL-00. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	TX*	RX*	Digi*
1760397687	184 Count	333 Count	114 Count
1760396783	180 Count	327 Count	111 Count
1760395880	175 Count	320 Count	107 Count
1760394976	171 Count	315 Count	104 Count
1760394072	168 Count	311 Count	102 Count
1760393169	165 Count	307 Count	100 Count
1760392265	162 Count	303 Count	98 Count
1760391361	159 Count	297 Count	96 Count
1760390458	156 Count	293 Count	94 Count
1760389643	153 Count	288 Count	92 Count
1760388739	150 Count	283 Count	90 Count
1760387836	147 Count	278 Count	88 Count
1760386932	144 Count	272 Count	86 Count
1760386028	141 Count	267 Count	84 Count
1760385125	138 Count	262 Count	82 Count
1760384221	135 Count	257 Count	80 Count
1760383317	132 Count	252 Count	78 Count
1760382413	128 Count	247 Count	75 Count
1760381510	125 Count	242 Count	73 Count
1760380606	122 Count	238 Count	71 Count
1760379702	119 Count	233 Count	69 Count
1760378799	116 Count	227 Count	67 Count
1760377895	113 Count	222 Count	65 Count
1760376991	110 Count	218 Count	63 Count
1760376087	107 Count	215 Count	61 Count

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time:

Maintained by I8FUC, based on APRS Track Direct